Ink Pads
Basic Stamp Pad (100mm x 67mm)
Used with Vue Stamps
Water based ink pad, suitable for stamping onto matte surfaces only.
Black, blue, red, green, violet
$9.00
Large Stamp Pad (135mm x 80mm)
Used with Vue Stamps
Water based ink pad, suitable for stamping onto matte surfaces only.
Black, blue, red, green, violet
$30.00
Stazon Solvent Ink Pad (75mm x 45mm)
Used with Vue Stamps
Quick drying, solvent ink pad, suitable for stamping onto glossy surfaces.
Black, blue, red, green
$15.10
Versacraft Fabric Ink Pad (75mm x 45mm)
Used with Vue Stamps
Suitable for stamping onto fabric. Works best on cotton and silk.
Heat setting (such as ironing) is required for permanence.
Black, white, red, green, blue, pink, purple
$15.10
Trodat replacement ink pads
We carry the range of replacement ink pads for Trodat stamps.
We also have ink to re-ink pads (though it is best to replace an ink pad if it is quite old rather than re-inking it).
How to remove a Trodat ink pad:
1. Depress unit by a few millimeters.
2. Press in the black lock buttons on both sides of unit.
3. Push the button on the front of the unit untill the ink pad comes out on the back side of the unit.
4. Insert new pad or re-ink old pad
Click Here to see a short animation.
How to re-ink a Trodat stamp:
1. Remove ink pad - Click Here to see a short animation.
2. Drop ink onto the surface of the pad - do not over ink.
3. Allow the ink to soak in the pad before re-inserting into the stamping unit.
Trodat ink: $8.00
28mm bottle
Black, Blue, Red, Green and Violet available
How to re-ink a Deskmate stamp:
1. Separate the blue top of the stamp from the grey coloured base with a firm pull.
2. Place 3-4 drops of ink into the ink wells. Do not over-ink, use only Deskmate ink.
3. Push the blue top back onto the base, allow to stand overnight / 24 hours
(impression face down with clear cap on).
Deskmate ink: $12 each
Red or Blue available
All prices include GST |